The vapman heating station is the ideal power source and heats the vapman electrically and temperature controlled. This allows you to heat your herbs to the perfect temperature without any risk of burning them.
The combination of fine workmanship and sleek design with modern electronics make it a pleasant experience to use.
Instruction manual
Place the vapman station on a stable and dry surface. Connect the device to the mains and switch on at the toggle switch. The red LED indicator lights up and the station heats up. After approx. 1 minute, the yellow indicator lights up and the station is ready for use. The desired temperature can be set with the selector knob. The 1 corresponds to a temperature of approx. 160°C/320°F and the
6 corresponds to approx. 230°C/450°F. Now your vapman can be heated up. Hold the vapman loosely by the mouthpiece or centerpiece and place it on the hot docking part without any force. With a slight twisting motion, the vapman will drop all the way down onto the docking piece and the indicator will flash yellow. As soon as the indicator lights up green, you can carefully lift your vapman from the docking part and start inhaling. If the inhalation seems too hot for you, you can set the temperature lower on the selector knob. However, if you feel that the temperature is too low, it is advisable to wait for a few more heating cycles, the final temperature will be reached only after a few cycles. Now you can continue the process and heat up vapman as many times as you like. vapman can only be heated up when the indicator is yellow, when the indicator is red, the indicator lights up white. In that case, simply lift vapman from the station and wait until the indicator lights up yellow. vapman should be removed from the station when the indicator is green, otherwise it will be heated above the selected temperature. The station will turn itself off after being unoccupied for more than 5 minutes.
Maintenance
The vapman station is basically maintenance free and will not get dirty during normal operation. If small particles get onto the hot docking part, they should only be removed by blowing them out and never with an object. If the particles cannot be removed by blowing them out, switch off the station and, after it has cooled down, remove the particles with a soft object. The unit should never come into contact with water or other liquids. The aluminum housing can be cleaned with a damp cloth. The device should only be stored in a dry place.
Technical data:
Diameter 65mm
Height 112 mm
Weight: 260 gr
Power: 20V/50V DC Temperature range: 140° - 230°C
